Heatmiser DS1 Central Heating Dial Thermostat

Introducing the Heatmiser DS1, a versatile 230v electronic room thermostat specially designed for conventional or combi-boiler systems. This advanced thermostat works in conjunction with a separate programmer, providing precise control over your heating system.

Key Features:

• Electronic Dial Thermostat: The Heatmiser DS1 is an electronic dial thermostat that offers superior control compared to standard bimetallic thermostats. It ensures accurate and consistent temperature regulation for optimal comfort.
• Power On and Heat On Indication: The thermostat features clear indicators to let you know when the power is on and when the heating is activated, providing instant feedback on the thermostat's status.
• Modern Appearance: With its sleek and modern design, the Heatmiser DS1 adds a touch of sophistication to any room. It blends seamlessly with your decor while offering advanced functionality.
• Precise Temperature Adjustment: Easily increase or decrease the required temperature with the intuitive dial control. Enjoy effortless temperature adjustments to create the perfect environment.
• Variable Switching Differential: The thermostat offers a variable switching differential, allowing you to customize the temperature range at which the heating system turns on and off. This feature provides fine-tuned control and energy efficiency.
• Built-In Air Sensor: The Heatmiser DS1 is equipped with a built-in air sensor that accurately measures the ambient temperature. This ensures precise temperature control for optimal comfort.

Please note that the Heatmiser DS1 requires at least 3 wires (Live, Neutral, and Switch wire) to operate. Before installation, carefully check your wiring and refer to the manual download to ensure compatibility with your system.

Elevate your heating control with the Heatmiser DS1 Central Heating Dial Thermostat, offering advanced features, precise temperature regulation, and a sleek design for enhanced comfort and convenience.

This dial thermostat is designed to be surface mounted.

• Separate the front part of the thermostat by unscrewing securing screws on the bottom face of the thermostat.
• Mark 2 hole positions on the wall using the backplate as a positioning template. Drill at the marked positions and insert a wall plug in to each hole.
• Terminate the thermostat as per wiring diagram and screw the DS1 back plate to the back box.
• Reconnect the thermostat front plate and insert the securing screws.