Overlay Panel Jointing Glue is applied as a flat bead to the middle of the board's edge using the nozzle supplied with the cartridge. The special nozzle dispenses just the correct amount of adhesive for a board thickness of 10 and 12.5 mm. The nozzle will need to be cut to the appropriate length for boards with a thickness of 15 and 18mm (this increases the amount of adhesive applied). The second board is then butted tightly against the first one and fixed into position. At a room temperature of 15 to 25 degrees the adhesive will be fully cured after 18 to 36 hours.
- Consumption: 20ml per metre run of joint
- Tube size: 310ml
- Drying time: 18 to 36 hours at 15 to 25 °C
- Full board strength even on un-supported horizontal joints
Delivery options Our delivery costs vary according to order size and location. For more information see our Delivery page
Trusted delivery partners
Feefo ReviewsConnection problem to Feefo server.
This product has no reviews yet.