100w ProWarm™ loose cable kit
100w/m2 underfloor heating cables provide a highly economical floor warming system and are used to cover larger areas.
Cable must be spaced 10cm apart to achieve correct wattage output.
100w/m2 are not suitable as a primary heating source, only to be used as secondary heating for under tiled floors.
Kit sizes range from 1.15m2 to 36m2
150w ProWarm™ loose cable kit
150w/m2 underfloor heating cables are suitable as a primary heating source providing you have adequate insulation.
Cable must be spaced 6.5cm apart to acheive correct wattage output.
These are our most commonly used cables for kitchens, dining rooms, large bathrooms and most other areas with tiled floors.
Kit sizes range from 0.75m2 to 24m2
200w ProWarm™ loose cable kit
200w/m2 underfloor heating cables are generally used in areas where high heat loss is a problem, such as conservatories and areas with bi fold doors.
Cable must be spaced 5cm apart to acheive correct wattage output.
Giving a 25% faster warm up time than standard 150w mats.
Kit sizes range from 0.6m2 to 18m2
ProWarm™ ProGrid+ Cable 150W
The ProWarm ProGrid+ matting and cable system is designed to make the installation of loose laid electric underfloor heating cable more efficient and less time consuming.
Warmup DCM-PRO Cable
Rated as High Performance, DCM-PRO is proven to protect tiled floors from cracking as tested by ANSI 118.12:5.4 (American National Standards Institute).
Warmup Loose Wire Underfloor Heating Kit
Warmup loose wire system provides the best flexibility of layout so are ideal for awkward shaped or smaller floor areas, they are usually installed beneath a tiled or stone floor finish but can be used beneath Vinyls when embedded within a suitable levelling compound.
150w Loose Cable Systems
When cost is more important than quality!
Thermoflex heating mats come with a 15 year manufacturers warranty.