DEVI Underfloor Heating Mat 150w

Details

Please Note: The following is intended as a guide only. Always refer to the full installation manual for instructions.

1. Divide the floor into a series of rectangles. From these measurements you can calculate how many mats you’ll need and what sizes. Exclude permanent or static fixtures from your calculations.
2. If the floor is screed over concrete, it is advisable to lay insulation boards to minimise heat loss and ensure quicker warm up times.
3. Lay the first run. At the end of the run cut the mat leaving the cable intact, turn the mat through 90° or 180° and continue laying. When the area is covered, adjust the mat until the loops are equal distance apart. Now attach the mat to the subfloor using the special tape supplied.
4. You will need to install an RCD fused spur which powers the thermostatic controller/programmer and the mat system. Lay the temperature probe from the timer-thermostat onto the floor, equidistant between two of the cable loops, and attach it to the floor surface. Now take the unheated power supply cable from the end of the mat system, which should be positioned near the thermostat. Once all the connections have been made to the power supply, run the heater(s) to ensure they are heating up (no more than 10 minutes).
5. Either lay a thin, self-levelling screed over the mat and leave it to dry before laying tiles or trowel flexible tile adhesive directly over the mat and lay the floor tiles. Once the grouting is complete, let the tile adhesive cure before switching on the system.

Supplied with the fitting pack is the The Market leading DEVIreg™ Touch thermostat.

The DEVIreg™ Touch is an innovative, simple, and easy-to-use underfloor heating thermostat and controller. It gives the end-user ultimate programming flexibility and is designed to fit directly into a regular wall socket.

Unique features of the DEVIreg™ Touch include:

This touch screen thermostat provides the user with the perfect balance between comfort and usage because of the variety of control options available.

Some of these options include:

• Shortcut button for frost protection
• Disable timer
• Away & off mode
• Set time settings and temperature levels for each day

The DEVIreg™ Touch is equipped with an open window detection system that automatically turns off the underfloor heating should it detect a window is open in the room - this helps to reduce energy consumption and ultimately saves on cost.

The DEVIreg™ Touch comes with a 5 Year No Quibble Warranty.