Heatmiser Edge Thermostat
Heatmiser Edge Thermostat
The Heatmiser edge is our 230v powered Thermostat that is compatible with the wireless air sensor and wireless door/window switch. The wireless air sensor function is perfect for those looking to measure the temperature in another location and for those with larger open plan properties, multiple air sensors can be used to create an average temperature.
Heatmiser edge offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.
All to often thermostats are installed in a less than convenient place, resulting in the building being too warm or too cold. With Edge, a single or multiple Wireless Air Sensors can be paired to the thermostat. When multiple sensors are used, the average temperature is calculated and is perfect for larger open plan properties.
In addition to the wireless air sensor, a wireless window/door switch can be paired to the Edge Thermostat, automatically switching the heating to Standby Mode whilst the window/door is open and then returning to normal mode when the window/door is closed.
Two models are available in the Edge Series. edge is our 3A conventional heating model whereas the edge-e has been designed for electric floor heating. Both include Modbus connectivity and are compatible with our Wireless Air Sensor and Window / Door Switch.
Self Learning Preheat
The Edge-e thermostat offers optimum start, a feature were the thermostat calculates the amount of heat up time required.
The Edge-e thermostat includes Modbus Connectivity. This allows third party integrators the ability to integrate the Edge series with home automation and building management systems.
Key locking with a PIN number is standard on all of the Edge series and is an excellent way to reduce tampering of the heating system.
- Large Display
- 5/2 Day, 7 Day or 24-hour Programming
- Self-Learning Optimum Start
- 4 or 6 Comfort Levels per Day (Selectable)
- Flush Mounting
- C°/F° Selectable
- Frost Protection
- Flexible Programming
- Optimum Start
- Holiday Function
- Key Lock Function
- Temperature Hold
- Modbus Connectivity
- Wireless Air Sensor Function
- Wireless Window/Door Switch Function
- Floor Sensor Mode
- Using a small screwdriver, slightly loosen the screw from the bottom face of the thermostat. You can then carefully separate the front half from the back plate.
- Place the edge-e LCD front plate somewhere safe. Terminate the edge-e as shown in the wiring diagram above.
- Screw the edge-e back plate securely into the back box.
- Replace the front of the thermostat onto the back plate, by locating the pins in the socket then insert the top edge first. Now push in the bottom edge, securing it in place with the retaining screw.
Important Do not install near to a direct heat source as this will affect functionality.
Important Do not push hard on the LCD screen as this may cause irreparable damage.
This thermostat is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.
|No. Heating Levels||4 or 6 (selectable)|
Our delivery costs vary according to order size and location. For more information see our Delivery page.
As standard we include FREE 2 - 3 working day delivery to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products.
All orders placed after 3pm on a Friday and at the weekend will be processed on Monday and placed on next working day delivery
Please note: orders must be placed before 3pm to be eligible for our Next Working Day, Next Working Day Before 10:30am and Saturday delivery options.