PLEASE NOTE: You will need a minimum of 15mm from the top of the shower tray to the top of the finished tile to ensure you can fit this tileable drain.

These wet room trays are not suitable for use with Vinyl or Altro resin floor coverings.

Prowarm™ Wet Room Shower Tray approx size 1000mm x 1000mm x 30mm with the drain position in the corner.

The wet room tray is lightweight, and can be cut easily using a fine tooth hand saw, the tray is designed to accept most tiles including porcelain, stone and ceramic tiles.

• Solid intergrated drain base (to prevent leaks!).
• 10 year manufacturers guarantee.
• High compressive strength

Drain cover options

Standard horizontal drain and basic stainless steel cover

The standard horizontal drain cover comes complete with a 2" solvent pipe, compatible with standard british pipes and non-standard 1 ½" pipes. The drain also comes with a removable hair trap. Grate size is 120mm x 120mm and has a 60l per minute flow rate. A 10 year guarantee against manufacturing defects comes as standard with this drain system.

Standard horizontal drain and tileable cover kit

This option comes with the standard drain as above but has a tileable cover (replacing the standard steel grate).

PLEASE NOTE: You will need a minimum of 15mm from the top of the shower tray to the top of the finished tile to ensure you can fit this tileable drain.

Standard horizontal drain and solid stainless steel grate

This option comes with the standard drain as above but is supplied with a solid stainless steel grate for a more designer look, this grate can also be screwed down (which is ideal for commercial installations).

To join the shower tray to the backer boards you have 2 options.

1. Use Prowarm™ self adhesive waterproofing tape
2. Separate waterproof tape and sealing compound