Basket
£0.00
- Description
-
Details
The Heatmiser Edge-e is a programmable electric floor heating thermostat, capable of switching up to 16A. A 3M remote floor sensor is included.
The Heatmiser Edge-e can be set to work as a non programmable, 5/2 day, 7 day or 24 hour programmable thermostat and provides 4 or 6 comfort levels per day.
This thermostat offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.
All to often thermostats are installed in a less than convenient place, resulting in the building being too warm or too cold. With Edge-e, a single or multiple Wireless Air Sensors can be paired to the thermostat. When multiple sensors are used, the average temperature is calculated and is perfect for larger open plan properties.
In addition to the wireless air sensor, a wireless window/door switch can be paired to the Edge-e Thermostat, automatically switching the heating to Standby Mode whilst the window/door is open and then returning to normal mode when the window/door is closed.
Self Learning Preheat
The Edge-e thermostat offers optimum start, a feature were the thermostat calculates the amount of heat up time required.
Modbus Connection
The Edge-e thermostat includes Modbus Connectivity. This allows third party integrators the ability to integrate the Edge series with home automation and building management systems.
Key Locking
Key locking with a PIN number is standard on all of the Edge series and is an excellent way to reduce tampering of the heating system.
- Installation
-
Looking for a product manual?
All product manuals and data sheets can be downloaded from our Manuals & Information section on this page. Alternatively head over to our Resource Centre to search our document library.
- Using a small screwdriver, slightly loosen the screw from the bottom face of the thermostat. You can then carefully separate the front half from the back plate.
- Place the edge-e LCD front plate somewhere safe. Terminate the edge-e as shown in the wiring diagram above.
- Screw the edge-e back plate securely into the back box.
- Replace the front of the thermostat onto the back plate, by locating the pins in the socket then insert the top edge first. Now push in the bottom edge, securing it in place with the retaining screw.
Important Do not install near to a direct heat source as this will affect functionality.
Important Do not push hard on the LCD screen as this may cause irreparable damage.
This thermostat is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.
- Specification
-
Looking for a product manual?
All product manuals and data sheets can be downloaded from our Manuals & Information section on this page. Alternatively head over to our Resource Centre to search our document library.
- Flexible Programming
- Optimum Start
- Holiday Function
- Key Lock Function
- Temperature Hold
- Modbus Connectivity
- Wireless Air Sensor Function
- Wireless Window/Door Switch Function
- Floor Sensor Mode
- Floor Sensor Inc.
Temperature Range 05-35C No. Heating Levels 4 or 6 (selectable) Max Current 16A Supply 230v Dimensions (L,H,D) 90x90x15mm - Delivery
-
Delivery options Our delivery costs vary according to order size and location. For more information see our Delivery page
As standard we include FREE 2 - 3 working day delivery to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products.
All orders placed after 3pm on a Friday and at the weekend will be processed on Monday and placed on next working day delivery
Please note: orders must be placed before 3pm to be eligible for our Next Working Day, Next Working Day Before 10:30 and Saturday delivery options.
Trusted delivery partners
- Reviews
-
Feefo Reviews - Average 0% (0 reviews)
This product has no reviews yet. 
This product has no reviews yet.
