Looking for a product manual?
All product manuals and data sheets can be downloaded from our Manuals & Information section on this page. Alternatively head over to our Resource Centre to search our document library.
This ProTouch iQ is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.
- Remove the screw from the bottom face of the thermostat then carefully separate the front half from the back plate.
- Place the thermostat front somewhere safe. Terminate the thermostat as shown in the above diagram.
- Screw the thermostat back plate securely into the back box.
- Clip the front of the thermostat onto the back plate, securing it in place with the retaining screw.
Important Do not install near to a direct heat source as this will affect functionality.
Important Do not push hard on the LCD screen as this may cause irreparable damage.