The Heatmiser neoKit 1 includes a neoStat and neoHub, allowing you to take control of your heating from anywhere.
The neoStat is a 230v powered thermostat with a volt free switch. The neoStat communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.
Simple installation is key with Neo. NeoStat has been designed to replace an existing three wire thermostat, and after joining the zone to the neoHub, remote control is possible.
Watch our video here and be surprised how easy SmartPhone control of your heating can be! The neoStat can be configured to work as a thermostat or as a timer - so if you want to take control of your towel rails, or lighting - Neo offers you this and more!
neoStat communicates wirelessly to the neoHub to offer a reliable and scalable network system. The mains powered neoStat automatically repeats the data signal from other neoStats in the home.
The neoStat series offers an easy to navigate programming system, providing all of the options across the bottom of the back lit display.
Self Learning Preheat
Self Learning Preheat calculates the amount of heat up time required to ensure your home is warm when you wake and return home.
This is automatically optimised throughout the year to save you money and will automatically detect any changes in your home that causes the preheat time to change.
- Thermostat Mode
- Timer Mode
- Back Lit Display
- Non Programmable
- 5/2, 7 Day or 24 Hour Programming
- Holiday Function
- Temperature Hold
- App Control
- Air Sensor Connection
- Floor Sensing Mode
The neoHub handles all of the network communication between the neoStat, neoAir and neoPlug and is very much the brain of the Neo System. Therefore you will require one if you’re looking to control your heating & hot water system from your SmartPhone.
Cloud Server Connection
As the Heatmiser neoHub connects via the Heatmiser Cloud Servers, there isn’t any technical setup.
The neoHub handles all of the network traffic, automatically routing data the best way from neoStat to neoStat. Mesh Networking helps to ensure you have great coverage throughout your home. For troublesome signal areas, the neoPlug can be used to boost the signal.
Our auto updates will ensure your Neo hub and connected devices are always running the latest firmware, this means you can benefit from the latest software enhancements.
The neoHub connects to your home router by an ethernet cable, so one free port is required. The hub is very much plug and play and pairing neoStat’s, neoAir & neoPlug to the neoHub couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In-Home and Remote access of your heating, hot water and appliances.
To ensure your neoHub is always up to date, it will automatically download and install updates so you will always benefit from the very latest software enhancements.
Looking for a product manual?
- Remove the screw from the bottom face of the thermostat then carefully separate the front half from the back plate.
- Place the thermostat front somewhere safe. Terminate the thermostat as shown in the wiring diagram. Further wiring diagrams are available in the downloadable user guide on this page.
- Screw the thermostat back plate securely into the back box.
- Clip the front of the thermostat onto the back plate, securing it in place with the retaining screw.
Important Do not install near to a direct heat source as this will affect functionality.
Important Do not push hard on the LCD screen as this may cause irreparable damage.
This neoStat is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.
Looking for a product manual?
Supply 230v AC Dimensions (L,H,D) 85x85x15mm Temperature Range 05-35C No. Heating Levels 4 Max Current 3A
Connection 1 x Ethernet Port (RJ45) Lead Supplied No. of connected devices 32 Included in the kit 1 x neoHub
1 x Ethernet Lead
1 x Mini USB Power Lead
4 x Power Adaptors
Mesh function Yes Supply 230V AC Dimensions (W x H x D) 170 x 91 x 25.5mm
Delivery options Our delivery costs vary according to order size and location. For more information see our Delivery page
As standard we include FREE 2 - 3 working day delivery to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products.
Trusted delivery partners
Feefo Reviews - Average 100% (1 reviews)
Date Score Customer Comment Our Response 03-Dec-2014 Product:
Excellent Read more reviews on Feefo
This product has no reviews yet.