Basket
£0.00
Water underfloor heating accessories
-
Our Price:£73.49 inc VATThe bypass valve serves to maintain the pump pressure in heating systems at a constant level. This is necessary when the radiator / underfloor heating thermostat valves are closed or almost closed.
Learn More -
From:Our Price:£70.19 inc VATProWarm™ Pex-Al-HDPE pipe was conceived and designed to satisfy the most demanding and diverse possible uses. The result is still the most innovative, multifunctional and most reliable pipe on the international market.
Learn More -
From:Our Price:£81.99 inc VATProWarm™ Pex-Al-HDPE pipe was conceived and designed to satisfy the most demanding and diverse possible uses. The result is still the most innovative, multifunctional and most reliable pipe on the international market.
Learn More -
As low as: £4.49Aluminium heat spreader plates are 390mm x 1000mm x 0.3mm (groove depth: 16mm) diffiuser plates suitable for joist centers of 400mm.
Learn More -
As low as: £4.49Aluminium heat spreader plates are 390mm x 1000mm diffiuser plates suitable for joist centers of 400mm.
Learn More -
Our Price:£9.57 inc VATProCrate Egg Crate is a quick and simple system to install. The main benefit of the system is the ready made pipe spacing and pipe retaining fixings.
Learn More -
Our Price:£8.51 inc VATThe Profix Floor Panel has multiple pipe retention clips to secure the pipe in place.
Learn More -
Our Price:£17.03 inc VATProWarm™ LoFlo™ Warm-Panels utilise a 18mm high density dry screed board which acts as a heat conducting surface transferring the heat from the pipes to the heated floor above.
Learn More -
Our Price:£17.03 inc VATOut of stock
ProWarm™ LoFlo™ Warm-Panels utilise a 15mm high density dry screed board which acts as a heat conducting surface transferring the heat from the pipes to the heated floor above.
Learn More -
Our Price:£3.18 inc VATThe LoFlo™ End Support is a multifunctional pipe return, pipe clip and floor support which has multiple snapping points to be able to decrease its size and maximize the heat emitter area.
Learn More -
Our Price:£3.18 inc VATThe LoFlo™ End Support is a multifunctional pipe return, pipe clip and floor support which has multiple snapping points to be able to decrease its size and maximize the heat emitter area.
Learn More -
Our Price:£20.80 inc VAT230 volt actuator 2 wire/normally closed. Fits most manifolds to the M30 thread
Learn More -
Our Price:£47.99 inc VAT50m of flexible Pipe Conduit.
For use when pipe is to pass through obstacles such as walls and joints in screed, also to insulate leading pipes to far off areas to avoid hot spots in floor.
Learn More -
Our Price:£3.18 inc VATClip rail track is ideal when using warm water based underfloor heating within a screed or concrete floors.
Learn More -
From:Our Price:£17.29 inc VATSold in boxes of x300, our 40/60mm pipe staples are designed for use when pipework is to be installed directly on top of insulation.
Learn More -
Our Price:£6.38 inc VATThe pipe re-rounding tool is designed for use after cutting the pipework.
Learn More -
Our Price:£12.77 inc VATRatchet and lever mechanism will cut pipe, conduit and plastic extrusions up to 25mm without crushing.
Suitable for use with multi-layered barrier pipe up to 25mm Diameter
Learn More -
Our Price:£44.73 inc VATThis 1 inch, nickel plated ball valve set including Temperature gauges, supplied as a red/blue pair, is set for use with most manifolds.
Learn More -
Our Price:£39.13 inc VAT1 inch nickel plated fill/drain valves, includes hose connection, Auto air vent and Pressure gauge included.
Learn More -
Our Price:£32.42 inc VAT1 inch nickel plated fill/drain valves, includes hose connection, manual air vent
Learn More -
Our Price:£34.66 inc VATThis 1 inch, nickel plated ball valve set, supplied as a red/blue pair, is set for use with most manifolds.
Learn More -
-
Our Price:£9.57 inc VATNickel plated compression coupling 16mm x 15mm.
16mm x 15mm coupling for going from 16mm pipe to 15mm pipe (not for use going to 15mm copper ).
Learn More -
-
-
Our Price:£1.30 inc VAT12mm nickel plated eurocone connector, for connecting 12mm pipework to manifolds, these are standard when using ProWarm™ European Standard Pex-Al-HDPE pipe.
Learn More -
Our Price:£5.31 inc VAT15mm nickel plated eurocone connector, for connecting 15mm pipework to manifolds (can be used for polypipe/speedfit)
Learn More -
Our Price:£6.70 inc VAT16mm nickel plated eurocone connector, for connecting 16mm pipework to manifolds, these are standard when using ProWarm™ European Standard Pex-Al-HDPE pipe.
Learn More -
-
Our Price:£22.36 inc VAT1 inch nickel plated manifold extension coupling, suitable for adding extra circuits onto an existing system
Learn More -
Our Price:£44.72 inc VATThis BBA approved damp proof membrane is a low-density polyethylene membrane to protect buildings from moisture in the ground.
Learn More -
Our Price:£31.41 inc VATThis Vapour barrier covers 100m2. It is used to prevent moisture into concrete and timber frames. It is made from Recycled Polythene to NHBC standards and is very lightweight and easy to install.
Learn More -
Our Price:£186.36 inc VATOur pipe decoiler saves problems when laying water underfloor heating pipe.
Learn More
