Heatmiser neoAir V3 Wireless Smart Thermostat

The Heatmiser neoAir V3 Wireless Smart Thermostat offers a smarter and more convenient way to control your heating and hot water from anywhere in your home when paired with the Neohub. This battery-powered thermostat is compatible with the Heatmiser RF Switch and UH8-RF Wireless Receivers, providing seamless integration with your heating system.

The neoAir V3 can be easily configured to work as a thermostat, a timer, or a combination of both, making it perfect for controlling your heating and hot water systems according to your preferences and schedule.

Key Features:

• Self Learning Preheat: The neoAir V3 features Self Learning Preheat technology, which calculates the optimal heat-up time to ensure your home is warm and comfortable when you wake up or return home. This feature automatically adjusts throughout the year to save you money and adapts to any changes in your home that may affect the preheat time.
• Mesh Networking: The neoAir V3 and other neoStat/neoAir devices communicate wirelessly with the neoHub, creating a reliable and scalable network system. The mains-powered neoStat acts as a signal repeater, ensuring seamless communication between devices. If there are no neoStat devices installed, the neoAir communicates directly with the neoHub, and you can extend the communication distance using the neoPlug or Boost.
• Easy Navigation: The neoAir V3 features an intuitive and user-friendly programming system, with all the options conveniently displayed on the backlit screen for easy navigation.
• Battery Powered: The neoAir V3 is powered by batteries, offering flexibility in terms of thermostat placement without the need for wiring.
• Thermostat Mode: Use the neoAir V3 as a standalone thermostat to control the temperature of your heating system.
• Timer Mode: Set up timer programs to schedule heating and hot water according to your daily routine.
• Heating and Timer Mode: Combine thermostat and timer functionalities to achieve precise control over your heating and hot water systems.
• Backlit Display: The backlit display ensures clear visibility of temperature and settings, even in low-light environments.
• Non Programmable: Choose non-programmable options if you prefer manual temperature control without pre-set schedules.
• 5/2, 7 Day and 24 Hour Programming: Enjoy flexibility in programming with options for 5/2-day, 7-day, or 24-hour programming modes to suit your lifestyle.
• Self Learning Preheat: Benefit from the Self Learning Preheat feature, which optimizes heat-up times throughout the year and adjusts automatically to changes in your home.
• Holiday Function: Set a specific temperature during your absence to save energy while ensuring a comfortable return.
• Temperature Hold: Temporarily hold a desired temperature for consistent heating comfort.
• Air Sensor Connection: Connect an air sensor for precise temperature measurement and control.
• Floor Sensing Mode (Remote Floor Sensor): Utilize a remote floor sensor to monitor and regulate the temperature of your heated floors.
• Wireless Switching To UH8-RF or RF Switch: Enjoy wireless switching capabilities to control the UH8-RF or RF Switch, expanding your control options.
• Frost Protection: The thermostat includes frost protection to prevent freezing and maintain the safety of your heating system.
• C/F Selectable: Choose between Celsius and Fahrenheit temperature units according to your preference.
• 4 Comfort Levels per Day: Set up to four comfort levels per day for customized temperature control at different times.
• Key Code Facility: Enhance security and prevent unauthorized access with the key code facility.

Upgrade your home heating control with the Heatmiser neoAir V3 Wireless Smart Thermostat. Experience convenience, energy efficiency, and comfort at your fingertips with this advanced thermostat.

Specifications

Installation

• Carefully separate the front half of the thermostat from the back plate by placing a small flat head terminal driver into the slots on the bottom face of the thermostat.
• Mark 2 hole positions on the wall using the back plate as a positioning template. Drill at the marked positions and insert a wall plug into each hole.
• Screw the thermostat back plate securely on the wall.
• Clip the front of the thermostat back onto the thermostat back plate.

Important Do not install near to a direct heat source as this will affect functionality.

Important Do not push hard on the LCD screen as this may cause irreparable damage.

This wireless thermostat is designed to be surface mounted

Specifications

High-Quality Construction

• 
  ProWarm Electric Underfloor Heating Sticky Mat: Utilizes the same premium cable as the ProWarm Loose Cable kit. The mat incorporates a sticky fibreglass mesh to ensure optimal heat output by maintaining proper cable spacing. Installation is straightforward—simply roll out the mat to cover the desired heating area.
• 
  Heating Cable: Series-type with twin conductors and a 4m cold lead at one end.
• 
  Cable Composition: The resistance heating wire is encased in a fluoropolymer insulation layer, wrapped in protective metal shielding, and enclosed in a final plastic outer sheath. The twin conductor cable has a final diameter of 2mm.
• 
  Junction Design: Unique design for hot and cold lead junctions ensures they are 100% foolproof.

Standards and Approvals

• 
  Standards: Meets all test requirements of IEC 60335.
• 
  Certifications: CE certified by SGS.

Performance and Benefits

• 
  Cost-Effective: Provides heat precisely where needed, optimizing heat utilization and minimizing losses.
• 
  Flexibility: Can be installed in any area or floor layout.
• 
  Comfort: Close and uniform spacing of heating cables, combined with thermostat controls, allows for precise temperature settings, enhancing comfort.
• 
  DIY-Friendly: Designed for easy installation with clear instruction manuals and professional technical support.
• 
  Versatility: Available in various heat loads and sizes to suit various flooring types.

Mat Dimensions

• 
  Width: 0.5m
• 
  Length: Dependent on the selected square meter coverage
• 
  Cable thickness: 2mm

Kit Includes:

• Underfloor Heating Sticky Mat (Two individual mats if kit size over 12m2)
• Floor Primer - a high-performance universal priming/sealing agent suitable for plaster, timber, brick, and block work.
• Roller - a high-quality roller for applying floor primer to the subfloor
• Adhesive tape - works to assist in holding a mat or cable in position during installation
• 2m Floor Sensor Probe Conduit - provides a protective pathway for the sensor probe, connecting to your thermostat
• Digital thermostat (if selected) - adjust the heat settings and enjoy warm floors through a simple touch of a button

Installation

Please Note: This is a brief guide. Always refer to the full installation manual for comprehensive instructions.

1. Plan Your Layout:

• Divide the floor into a series of rectangles. Use these measurements to calculate the number and sizes of mats needed, excluding permanent or static fixtures from your calculations.

2. Prepare the Subfloor:

• For screed over concrete floors, lay insulation boards to minimize heat loss and ensure quicker warm-up times.

3. Lay the Heating Mat:

• Start with the first run of the mat. Cut the mat (leaving the cable intact) at the end of each run, turn it 90° or 180°, and continue laying.
• Once the area is covered, adjust the mat so that the loops are evenly spaced.
• Secure the mat to the subfloor using the special tape provided.

4. Electrical Connections:

• Install an RCD fused spur to power the thermostatic controller/programmer and the mat system.
• Lay the temperature probe from the timer-thermostat onto the floor, position it equidistant between two cable loops, and secure it to the surface.
• Position the unheated power supply cable from the end of the mat system near the thermostat.
• Make all necessary connections to the power supply. Run the heaters for no more than 10 minutes to ensure they are heating up properly.

5. Finish the Flooring:

• Option 1: Apply a thin, self-levelling screed over the mat and allow it to dry completely before laying tiles.
• Option 2: Directly trowel flexible tile adhesive over the mat and lay the floor tiles.
• After grouting, let the tile adhesive cure fully before switching on the system.