A multi-use synthetic polymer primer and admixture, BAL Bond SBR can be used as a bonding agent for adding to mortars used in screeding, plaster, rendering, bricklaying, pointing and repairs and as a primer for tile fixing onto timber, plaster, screeds, rendering or vinyl tiles. BAL Bond SBR is suitable for swimming pools and as a slurry coat of cement or plaster mix for wall and floor backgrounds.

As a multi-purpose bonding agent and primer, BAL Bond SBR produces time and cost savings for your project. Use as a bonding agent and admixture to enhance the physical properties of mortars including adhesion, durability, flexibility, waterproofing and workability. BAL Bond SBR is also suitable as a primer prior to fixing on a variety of substrates, giving you peace of mind that your project will last the test of time. Available in 1 litre bottles to suit your need.

Use for

Bonding agent and admixture for adding to mortars used for screeding, rendering, bricklaying, pointing, and repairs.
Primer before tile fixing on timber, plaster, screeds, rendering or vinyl tiles.
Slurry coat of cement or plaster mix for wall and floor backgrounds in dry or wet interior and exterior environments.

Product Information

Composition: Water-based dispersion of a styrene butadiene copolymer.
Enhances physical properties/performance of mortars including adhesion, durability, flexibility, waterproofing and workability.
Permits feather edging of repair mortars.
Prepares tiling backgrounds/substrates.

Specifications

Use For	Enhancing the physical properties/performance of mortars including adhesion, durability, flexibility, waterproofing and workability Dry/wet interior/exterior
Advantages	Priming of plaster/screed/timber/ vinyl surfaces Admixture for screeding/rendering mortars Promoting increased bond strength/ waterproofing/ performance properties

Typical Coverage (per pack) As bonding aid/admixture @ 10 litres per 50kg OPC

	1L	5L
Plastering (12mm bed):	5m²	25m²
Rendering (12mm thick):	1.5m²	7.5m²
Screeding (50mm thick):	0.25m²	1.25m²

As Primer - diluted 1:4 with clean water

	1L	5L
Undiluted (timber/vinyl):	12m²	60m²
Diluted* (plaster):	60m²	300m²

As Slurry Coat

	1L	5L
Portland Cement (1mm thick):	3m²	15m²