Basket
£0.00
- Description
-
Details
ProWarm™ Water Underfloor Heating Systems are the ideal choice for homeowners and tradesmen wishing to install a Premium Branded water underfloor heating kit.
This multi-room water underfloor heating kit will supply all the pipe and fittings you'll need to cover your chosen zone size.
Please Note : ProWarm™ Water Underfloor Heating kits feature water temperature control, beware of systems without this facility. ProWarm™ only use high quality European Standard Pex-Al-HDPE pipe. The aluminium layer acts as an oxygen barrier, preventing the oxygen diffusion through the polymer matrix, which stops corrosion of the metal components in the system.
Visit www.prowarm.com for more details.
ProWarm™ Water Underfloor Heating Kit Components:
Below are examples of all products which could comprise your ProWarm™ Water Underfloor Heating Kit. Find out exact manifold size and pipe length for your chosen kit size by using our handy Kit Content Comparison Table below.
-
Grundfos Mixing Unit
A rated UPS 2 Grundfos Manifold Pump/Mixing Valve Unit.
-
Manual thermostat
For a small additional fee you can upgrade your thermostat to a digital, programmable, wireless or touchscreen one.
-
Manifold
Stainless steel manifold with adjustable flow meter. Factory assembled on fixing bracket.
-
Wiring Center and actuators
PLEASE NOTE: Wiring Center image is generic and may change depending on which thermostats are purchased.
-
ProWarm™ European Standard Pex-Al-HDPE pipe
16mm (outside) diameter Pex-Al-HDPE pipe
-
Edging Insulation
Edge Insulation is to be used around the edge of the room in order to minimise unwanted heat loss and allow for expansion.
-
Tools
Pipe Re Rounding Tool, Pipe Staples, Pipe Cutters, Nuts and Olives, Valves and all items required to install
Kit Content Comparison Table
This table shows exactly what you'll get in the box based on your chosen kit size.
Kit Size (m2) 402 circuits 603 circuits 804 circuits 1005 circuits 1206 circuits 1407 circuits 1608 circuits 1809 circuits 20010 circuits Manifold Pump + Mixer Manual Thermostat Number of Thermostats 2 3 4 5 6 7 8 9 10 Manifold Ports 2 3 4 5 6 7 8 9 10 Wiring Centre Actuators 2 3 4 5 6 7 8 9 10 Pipe Length (m) 200 300 400 500 600 700 800 900 1000 Edging Insulation Tools Kit Size (m2) 402 circuits 603 circuits 804 circuits 1005 circuits 1206 circuits Manifold Pump + Mixer Manual Thermostat Number of Thermostats 2 3 4 5 6 Manifold Ports 2 3 4 5 6 Wiring Centre Actuators 2 3 4 5 6 Pipe Length (m) 200 300 400 500 600 Edging Insulation Tools Kit Size (m2) 1407 circuits 1608 circuits 1809 circuits 20010 circuits Manifold Pump + Mixer Manual Thermostat Number of Thermostats 7 8 9 10 Manifold Ports 7 8 9 10 Wiring Centre Actuators 7 8 9 10 Pipe Length (m) 700 800 900 1000 Edging Insulation Tools -
- Specification
-
Looking for a product manual?
All product manuals and data sheets can be downloaded from our Manuals & Information section on this page. Alternatively head over to our Resource Centre to search our document library.
(1) At any rate above the freezing temperature of the transported fluid.Features Values Testing Methods Material Crosslinked polyethylene PE-Xb internal layer, internal bonding layer, intermediate aluminium layer, external bonding layer, high density polyethylene HDPE external layer. - Colour RAL white 9003 - Dimensions 14÷32 mm - Application Hot and cold potable water distribution, convector and radiator heating systems, raidant heating and air cooling systems, compressed air distribution systems, industrial installations. - Fittings Pexal® Brass, Bravopress® and Pexal® Twist - Minimum operating Temperature(1) -60°C - Maximum temperature +95°C/+100°C EN ISO 21003-1 Maximum Pressure +10 bar EN ISO 21003-1 Density at 23°C > 0.950 g/cm3 (crosslinked polyethylene) - Softening temperature 135°C - Thermal expansion coefficient 0.026 mm/m·K - Thermal conductivity 0.42÷0.52 W/m·K - Internal roughness 0.007 mm - Oxygen permeability 0 mg/l - UV Resistance Yes, if protected with UV-resistant paint - Halogen levels Halogen-free - - Thermostat
-
All our kits come with the Heatmiser DS1, our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. This thermostat is used in conjunction with a separate programmer.
-
Manual ThermostatTechnical Info
- Power On & Heat On Indication
- Modern Apperance
- Easily increase or decrease the required temperature
- Variable Switching Differential
- Outputs: Volt free 3A Max
Dimensions 92mm x 92mm x 34mm Mounting Surface mounting Load 230v -
Slimline Digital Programmable ThermostatThe Heatmiser Slimline is our 230v programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day.
Technical Info
- Large Display
- 5/2 Day or 7 Day Programming
- Self Learning Optimum Start
- 4 Comfort Levels per Day
- Temperature Hold Facility
- Holiday Facility
- Automatic Blue Back-Lit Display (Turns off after 30 seconds)
- Flush Mounting
- °C/°F Selectable
- Key Locking
- Frost Protection
- Remote Control Option
Dimensions 98mm x 85mm x 13mm Mounting Flush mounted Load 12v - volt free 3A Max -
Digital programmable
The Heatmiser neoStat is our all new product for 2014, offering you a smarter way to control your heating from anywhere!
Technical Info
- Stunning design incorporating soft touch keys
- Non Programmable, 5/2 Day, 7 Day & 24 Hour programming modes
- Air, Air & Floor & Floor only sensing modes
- 5 minute program intervals
- Self learning optimum start
- 4 comfort level/ Times per day
- Holiday facility
- Automatic blue back light (turns off after 30 secs)
- Flush mounting
- °C/°F selectable
- Key Code facility
- Frost protection
-
Touch ThermostatThe Heatmiser Touch is our 230v Touchscreen, programmable room thermostat, ideal for conventional or combi-boiler systems. This thermostat can be used to replace a mechanical thermostat.
Technical Info
- Blue back-lit Touchscreen
- Weekday/Weekend or 7 Day Programming (Selectable in Software)
- Holiday Function
- Hold Function
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Key Locking Facility
- Frost protection with adjustable temperature setting
- Easily increase or decrease the required temperature
Dimensions 110mm x 100mm x 17mm Mounting Flush mounting Load 110v / 230v - volt free 3A Max -
Slimline-RF Programmable Wireless ThermostatThe Heatmiser Slimline-RF works with the Heatmiser RC1-W Wireless receiver, which is hard wired to the boiler. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver. An optional repeater is available (Heatmiser WR1) in order to extend the communication distance.
Technical Info
- Wireless Thermostat - 868MHz
- Large Back Lit Display
- 5/2 or 7 Day Programming Modes
- 4 Comfort Levels per Day
- Optimum Start
- Wireless Fail Safe Function
- °C/F Option
- 05°C - 35°C Range
- Holiday Function
- Hold Function
- Wall Mount
- Frost Protection
- Key Lock Facility
- Compatible with UH1-W, RC1-W, WR1
- Remote Air Sensing Facility
Dimensions 98mm x 85mm x 24mm Mounting Wall mounting / Free standing Load 12v - volt free 3A Max -
ProTouch™ WiFi
ProTouch Smart WiFi Thermostat enables control without the need for a control centre, just pair to home WiFi using the easy to use application available on both Android and IOS platforms. Designed to enhance the experience of the end user with a 7-day programmer, optimal start features, multi temperature display and easy to read displays.
Technical Info
- WiFi Control - App available on IOS and Android. Compatible with Alexa
- Double Temperature Control - Floor and room sensors, with multiple precise temperature control mode
- Programmable - 7-Day Programmer 4 Settings per day
- Large Screen - Easy operation, all parameters displayed on the screen
- Professional Design - First class quality, complete functions
Dimensions 87mm x 87mm x 42mm
-
- Delivery
-
Delivery options Our delivery costs vary according to order size and location. For more information see our Delivery page
As standard we include FREE 2 - 3 working day delivery to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products.
All orders placed after 3pm on a Friday and at the weekend will be processed on Monday and placed on next working day delivery
Please note: orders must be placed before 3pm to be eligible for our Next Working Day, Next Working Day Before 10:30 and Saturday delivery options.
Trusted delivery partners
- Reviews
-
Feefo Reviews - Average 100% (4 reviews)
Date Score Customer Comment Our Response 22-Feb-2019 Product: 
Great product very easy to install 22-Nov-2018 Product:
Brilliant piece of kit! great! 28-Feb-2017 Product:
Quick shipping................ 01-Feb-2017 Product:
Great product, Easy setup for the manafold, took a little getting used to laying the pipe, but was my first go alone all went very well. Read more reviews on Feefo 
ProWarm™ Multiple Room Water Underfloor Heating Kit
Robert Wright 3 years agoUsed this product loads of times without any problems. Fairly priced as well.
Manuals & Information
Related Products
You may also be interested in...
-
ProWarm™ LoFlo™ 15mm Multiple Room kit
As low as: £2,774.99
-
ProWarm™ LoFlo™ 18mm Multiple Room kit
As low as: £2,645.99
-
Polypipe multiple room system
As low as: £2,487.99
-
Polypipe - Multiple Room Overlay Heating Kit
As low as: £4,177.99
-
Thermoflow Multi Zone & Large Area Water Heating Kit
As low as: £525.99
