ProWarm Pert-Al-Pert Pipe 16mm

The ProWarm Pert-Al-Pert Pipe 16mm is a high-quality, multilayered pipe specifically engineered for a wide range of applications. With its innovative design and superior performance, it has become the go-to choice for professionals and homeowners alike.

Crafted with meticulous attention to detail, the ProWarm Pert-Al-Pert pipe is built to exceed even the most demanding requirements. Its multi layered construction ensures exceptional strength and durability, providing long-lasting performance and reliability. Whether you need it for heating, plumbing, or other applications, this pipe delivers outstanding results.

The ProWarm Pert-Al-Pert pipe stands out as the most innovative and multifunctional pipe in the international market. Its versatility allows for seamless integration into various systems and installations. It can handle high temperatures and pressures, making it suitable for both residential and commercial projects.

Designed to meet the highest industry standards, the ProWarm Pert-Al-Pert pipe offers reliable performance and peace of mind. It resists corrosion and chemical damage, ensuring long-term integrity and functionality. With its excellent thermal conductivity, this pipe maximizes the efficiency of heating systems, ensuring even heat distribution throughout your space.

✅ The ProWarm Pert-Al-Pert Pipe 16mm is WRAS approved, this indicates the product has been thoroughly tested to demonstrate it is of suitable quality and standard against the requirements of the Water Fittings Regulations and Scottish Byelaws.

Whether you are a professional installer or a DIY enthusiast, you can trust in the ProWarm Pert-Al-Pert pipe for its quality and reliability. Experience the superior performance and versatility of this innovative pipe in your next project.

• Pert-Al-Pert
• 100% Oxygen Impermeable
• 50 Year Warranty
• Working Pressure & Temperature 10bar, 95°C
• Two bonding layers
• ProWarm European Standard Pert-Al-Pert pipe is the most innovative, multifunctional and most reliable pipe on the international market.
• Using the highest quality 16mm (outside) diameter ProWarm European Standard Pert-Al-Pert pipe.
• The triple layered pipe creates an oxygen barrier which is 100% tight and its diameter calculated to allow for maximum performance and flexibility.
• The middle aluminium layer diffuses the heat more efficiently and offers excellent conductivity, which is necessary for low-temperature systems – this allows the requirement of less pipe work to other systems.

Specifications

High-Quality Construction

• 
  ProWarm Electric Underfloor Heating Sticky Mat: Utilizes the same premium cable as the ProWarm Loose Cable kit. The mat incorporates a sticky fibreglass mesh to ensure optimal heat output by maintaining proper cable spacing. Installation is straightforward—simply roll out the mat to cover the desired heating area.
• 
  Heating Cable: Series-type with twin conductors and a 4m cold lead at one end.
• 
  Cable Composition: The resistance heating wire is encased in a fluoropolymer insulation layer, wrapped in protective metal shielding, and enclosed in a final plastic outer sheath. The twin conductor cable has a final diameter of 2mm.
• 
  Junction Design: Unique design for hot and cold lead junctions ensures they are 100% foolproof.

Standards and Approvals

• 
  Standards: Meets all test requirements of IEC 60335.
• 
  Certifications: CE certified by SGS.

Performance and Benefits

• 
  Cost-Effective: Provides heat precisely where needed, optimizing heat utilization and minimizing losses.
• 
  Flexibility: Can be installed in any area or floor layout.
• 
  Comfort: Close and uniform spacing of heating cables, combined with thermostat controls, allows for precise temperature settings, enhancing comfort.
• 
  DIY-Friendly: Designed for easy installation with clear instruction manuals and professional technical support.
• 
  Versatility: Available in various heat loads and sizes to suit various flooring types.

Mat Dimensions

• 
  Width: 0.5m
• 
  Length: Dependent on the selected square meter coverage
• 
  Cable thickness: 2mm

Kit Includes:

• Underfloor Heating Sticky Mat (Two individual mats if kit size over 12m2)
• Floor Primer - a high-performance universal priming/sealing agent suitable for plaster, timber, brick, and block work.
• Roller - a high-quality roller for applying floor primer to the subfloor
• Adhesive tape - works to assist in holding a mat or cable in position during installation
• 2m Floor Sensor Probe Conduit - provides a protective pathway for the sensor probe, connecting to your thermostat
• Digital thermostat (if selected) - adjust the heat settings and enjoy warm floors through a simple touch of a button

Installation

Please Note: This is a brief guide. Always refer to the full installation manual for comprehensive instructions.

1. Plan Your Layout:

• Divide the floor into a series of rectangles. Use these measurements to calculate the number and sizes of mats needed, excluding permanent or static fixtures from your calculations.

2. Prepare the Subfloor:

• For screed over concrete floors, lay insulation boards to minimize heat loss and ensure quicker warm-up times.

3. Lay the Heating Mat:

• Start with the first run of the mat. Cut the mat (leaving the cable intact) at the end of each run, turn it 90° or 180°, and continue laying.
• Once the area is covered, adjust the mat so that the loops are evenly spaced.
• Secure the mat to the subfloor using the special tape provided.

4. Electrical Connections:

• Install an RCD fused spur to power the thermostatic controller/programmer and the mat system.
• Lay the temperature probe from the timer-thermostat onto the floor, position it equidistant between two cable loops, and secure it to the surface.
• Position the unheated power supply cable from the end of the mat system near the thermostat.
• Make all necessary connections to the power supply. Run the heaters for no more than 10 minutes to ensure they are heating up properly.

5. Finish the Flooring:

• Option 1: Apply a thin, self-levelling screed over the mat and allow it to dry completely before laying tiles.
• Option 2: Directly trowel flexible tile adhesive over the mat and lay the floor tiles.
• After grouting, let the tile adhesive cure fully before switching on the system.