Multi Zone system – Multiple thermostat system, one thermostat per room, these kits are based on 20m² per room/zone.

ProWarm™ LoFlo™ is a unique low profile floor heating system ideal for both renovation and new build projects.

Installed over the existing floor and only 18mm in depth, ProWarm™ LoFlo™ allows floor heating to be installed where traditional under floor systems would either require expensive excavation or would require the floor to be raised to an unacceptable level.

ProWarm™ LoFlo™ panel is a fibrous panel used for heavyweight floor coverings such as ceramics, or where the floor covering needs to be secured directly to the panel, e.g. engineered wood which requires fixing down.

ProWarm™ LoFlo™ systems utilise a 12mm pipe at 150mm pipe centres and provide excellent response times and heat output compared with traditional built in under floor heating solutions and are therefore ideal for both traditional heating systems and low temperature renewable systems.

With a unique end support that allows the installer to simply 'SNAP-OFF' sections to leave the desired number of channels around the edge of the room. Making the installation of the leaders and perimeter loops more straightforward.

ProWarm™ Water Underfloor Heating Kit Components:

Below are examples of all products which could comprise your ProWarm™ Water Underfloor Heating Kit. Find out exact manifold size and pipe length for your chosen kit size by using our handy Kit Content Comparison Table below.

• Grundfos Mixing Unit

  

  A rated UPS 2 Grundfos Manifold Pump/Mixing Valve Unit.

• Manual thermostat

  

  For a small additional fee you can upgrade your thermostat to a digital, programmable, wireless or touchscreen one.

• Manifold

  

  Stainless steel manifold with adjustable flow meter allows easy balancing. Factory pre-assembled on fixing brackets.

• ProWarm™ European Standard Pex-Al-HDPE pipe

  

  12mm (outside) diameter Pex-Al-HDPE pipe

• LoFlo™ Floor Panel

  

  ProWarm™ LoFlo™ 18mm floor panels

• Tools

  

  Pipe Cutters

• Wiring center and actuators

  

  PLEASE NOTE: Wiring Center image is generic and may change depending on what thermostats are purchased.

Kit Content Comparison Table

This table shows exactly what you'll get in the box based on your chosen kit size.

Kit Size (m2)	40	60	80
Manifold Pump
Manual Thermostat
Manifold Ports	4	6	8
Wiring Centre
Actuators	4	6	8
Pipe Length (m)	320	480	640
Tools
Floor Panels	84	125	168