Basket
£0.00
- Description
-
Details
ProWarm™ Water Underfloor Heating Systems are the ideal choice for homeowners and tradesmen wishing to install a Premium Branded water underfloor heating kit.
ProWarm™ Water Underfloor Heating Single room kits are ideal for combining one area of water underfloor heating (eg. living room) with a standard radiator system. Each kit is designed to cover an area in square meters when the pipe is spaced at 250mm apart. This spacing provides an output of 115w per square meter. If you require a higher output please choose a high output kit.
Please Note : ProWarm™ Water Underfloor Heating kits feature water temperature control, beware of systems without this facility. ProWarm™ only use high quality European Standard Pex-Al-HDPE pipe. The aluminium layer acts as an oxygen barrier, preventing the oxygen diffusion through the polymer matrix, which stops corrosion of the metal components in the system. Visit prowarm.com for more details.
ProWarm™ Water Underfloor Heating Kit Components:
Below are examples of all products which could comprise your ProWarm™ Water Underfloor Heating Kit. You can find out exactly what you will get in the box using our handy Kit Content Comparison Table below.
-
Grundfos Temperature Unit
A rated UPS 2 Grundfos Single Circuit Constant Supply Temperature Unit.
-
Grundfos Mixing Unit
A rated UPS 2 Grundfos Manifold Pump/Mixing Valve Unit
-
2,3 or 4 Port Manifold
Stainless steel manifold with adjustable flow meter. Factory assembled on fixing bracket.
-
Manual thermostat
For a small additional fee you can upgrade your thermostat to a digital, programmable, wireless or touchscreen one.
-
ProWarm™ European Standard Pex-Al-HDPE pipe
16mm (outside) diameter Pex-Al-HDPE pipe
-
Edging Insulation
Edge Insulation is to be used around the edge of the room in order to minimise unwanted heat loss and allow for expansion.
-
Tools
Pipe Re Rounding Tool, Pipe Staples and Pipe Cutters.
Kit Content Comparison Table
This table shows exactly what you'll get in the box based on your chosen kit size.
Kit Size (m2) 12 15 17 20 22 25 27 30 37 50 62 75 87 100 Single Circuit Pump Manifold Pump + Mixer Manual Thermostat Manifold Ports 2 2 3 3 4 4 Pipe Length (m) 50 60 70 80 90 100 110 120 150 200 250 300 350 400 Edging Insulation Pipe re-rounding tool Pipe staples Pipe cutters Nuts and olives Valves Kit Size (m2) 12 15 17 20 22 25 27 Temperature Unit Manifold Pump + Mixer Manual Thermostat Manifold Ports Pipe Length (m) 50 60 70 80 90 100 110 Edging Insulation Pipe re-rounding tool Pipe staples Pipe cutters Nuts and olives Valves Kit Size (m2) 30 37 50 62 75 87 100 Temperature Unit Manifold Pump + Mixer Manual Thermostat Manifold Ports 2 2 3 3 4 4 Pipe Length (m) 120 150 200 250 300 350 400 Edging Insulation Pipe re-rounding tool Pipe staples Pipe cutters Nuts and olives Valves -
- Specification
-
Looking for a product manual?
All product manuals and data sheets can be downloaded from our Manuals & Information section on this page. Alternatively head over to our Resource Centre to search our document library.
(1) At any rate above the freezing temperature of the transported fluid.Features Values Testing Methods Material Crosslinked polyethylene PE-Xb internal layer, internal bonding layer, intermediate aluminium layer, external bonding layer, high density polyethylene HDPE external layer. - Colour RAL white 9003 - Dimensions 14÷32 mm - Application Hot and cold potable water distribution, convector and radiator heating systems, raidant heating and air cooling systems, compressed air distribution systems, industrial installations. - Fittings Pexal® Brass, Bravopress® and Pexal® Twist - Minimum operating Temperature(1) -60°C - Maximum temperature +95°C/+100°C EN ISO 21003-1 Maximum Pressure +10 bar EN ISO 21003-1 Density at 23°C > 0.950 g/cm3 (crosslinked polyethylene) - Softening temperature 135°C - Thermal expansion coefficient 0.026 mm/m·K - Thermal conductivity 0.42÷0.52 W/m·K - Internal roughness 0.007 mm - Oxygen permeability 0 mg/l - UV Resistance Yes, if protected with UV-resistant paint - Halogen levels Halogen-free - - Thermostat
-
All our kits come with the Heatmiser DS1, our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. This thermostat is used in conjunction with a separate programmer.
-
Manual ThermostatTechnical Info
- Power On & Heat On Indication
- Modern Apperance
- Easily increase or decrease the required temperature
- Variable Switching Differential
- Outputs: Volt free 3A Max
Dimensions 92mm x 92mm x 34mm Mounting Surface mounting Load 230v -
Slimline Digital Programmable ThermostatThe Heatmiser Slimline is our 230v programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day.
Technical Info
- Large Display
- 5/2 Day or 7 Day Programming
- Self Learning Optimum Start
- 4 Comfort Levels per Day
- Temperature Hold Facility
- Holiday Facility
- Automatic Blue Back-Lit Display (Turns off after 30 seconds)
- Flush Mounting
- °C/°F Selectable
- Key Locking
- Frost Protection
- Remote Control Option
Dimensions 98mm x 85mm x 13mm Mounting Flush mounted Load 12v - volt free 3A Max -
Digital programmable
The Heatmiser neoStat is our all new product for 2014, offering you a smarter way to control your heating from anywhere!
Technical Info
- Stunning design incorporating soft touch keys
- Non Programmable, 5/2 Day, 7 Day & 24 Hour programming modes
- Air, Air & Floor & Floor only sensing modes
- 5 minute program intervals
- Self learning optimum start
- 4 comfort level/ Times per day
- Holiday facility
- Automatic blue back light (turns off after 30 secs)
- Flush mounting
- °C/°F selectable
- Key Code facility
- Frost protection
-
Touch ThermostatThe Heatmiser Touch is our 230v Touchscreen, programmable room thermostat, ideal for conventional or combi-boiler systems. This thermostat can be used to replace a mechanical thermostat.
Technical Info
- Blue back-lit Touchscreen
- Weekday/Weekend or 7 Day Programming (Selectable in Software)
- Holiday Function
- Hold Function
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Key Locking Facility
- Frost protection with adjustable temperature setting
- Easily increase or decrease the required temperature
Dimensions 110mm x 100mm x 17mm Mounting Flush mounting Load 110v / 230v - volt free 3A Max -
Slimline-RF Programmable Wireless ThermostatThe Heatmiser Slimline-RF works with the Heatmiser RC1-W Wireless receiver, which is hard wired to the boiler. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver. An optional repeater is available (Heatmiser WR1) in order to extend the communication distance.
Technical Info
- Wireless Thermostat - 868MHz
- Large Back Lit Display
- 5/2 or 7 Day Programming Modes
- 4 Comfort Levels per Day
- Optimum Start
- Wireless Fail Safe Function
- °C/F Option
- 05°C - 35°C Range
- Holiday Function
- Hold Function
- Wall Mount
- Frost Protection
- Key Lock Facility
- Compatible with UH1-W, RC1-W, WR1
- Remote Air Sensing Facility
Dimensions 98mm x 85mm x 24mm Mounting Wall mounting / Free standing Load 12v - volt free 3A Max -
Touch-RF Wireless ThermostatHeatmiser Touch-RF is our programmable wireless thermostat with Touchscreen display, ideal for those looking to relocate their existing thermostat.
The Heatmiser Touch-RF works with the Two Zone Heatmiser RC1-WTS Wireless receiver. The receiver is hard wired to the boiler, so this can be located next to the boiler or you could use the existing thermostat cabling. The wireless thermostat can then be desk or wall mounted with range of the receiver (up to 100 meters open space) enabling you to relocate your thermostat.
- Wireless Thermostat - 433MHz
- Large Back Lit Touchscreen Display
- 5/2 or 7 Day Programming Modes
- 4 Comfort Levels per Day
- Optimum Start
- °C/F Option
- 5°C - 35°C Range
- Holiday Function
- Hold Function
- Wall Mount or Desk Stand
- Rechargeable Battery (Approx 6 month between charges)
- Mini USB to USB cable provided to allow for recharging from PC
- Frost Protection
- Key Lock Facility
Dimensions 109mm x 99mm x 20mm Mounting Wall mounting / Free standing Load 12v - volt free 3A Max -
SmartPhone Control
The Heatmiser neoStat is also a new product for 2014, offeringyou a smarter way to control your water underfloor heating
The neoStat communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.
Technical Info
- Flexible Programming
- Comfortable Temperature
- Easy Away
- Convenient Profiles
- Always Updated
- Clock Sync
- Published API
Advanced heating control solutions in the palm of your hand
neoApp has been carefully designed with you in mind. It’s incredibly simple to download and use; giving you intuitive control over your home heating and hot water directly from your smartphone or tablet. In just a few quick screen taps you can change settings in all of your properties that have neoStats installed.
-
- Delivery
-
Delivery options Our delivery costs vary according to order size and location. For more information see our Delivery page
As standard we include FREE 2 - 3 working day delivery to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products.
All orders placed after 3pm on a Friday and at the weekend will be processed on Monday and placed on next working day delivery
Please note: orders must be placed before 3pm to be eligible for our Next Working Day, Next Working Day Before 10:30 and Saturday delivery options.
Trusted delivery partners
- Reviews
-
Feefo Reviews - Average 100% (10 reviews)
Date Score Customer Comment Our Response 03-Feb-2020 Product: 
excellent staf 11-Dec-2018 Product:
so far so good havent turned the heating on yet tho 11-Aug-2018 Product:
Great service and delivery as usual 21-May-2018 Product:
As good as always................ 09-Oct-2017 Product:
Great product all the parts are there and easy to install 28-Dec-2016 Product:
Excellent 26-Dec-2016 Product:
great kit - all complete, now about to install into the floor of our new utility room. 04-Nov-2016 Product:
Great stuff good qaulity for sure 16-Oct-2016 Product:
Great value for money - our builder was very impressed by the quality of the heating system we ordered, 11-Feb-2016 Product:
This has not yet been installed and is scheduled to be installed next week.
Thank you for the excellent service. My builder says it is very good.Read more reviews on Feefo 
ProWarm™ Standard Output Water Underfloor Heating Kit
Rafi one month ago👍👍👍👍👍👍👍👍Rafi 4 months agoI'm doing that underfloor heating staff for last couple of years and haven't got any problems so far.A Chaplin 2 years agoEasy to install and good quality stuff. Not a lot else to say, coverage quote maybe a little optimistic so if close to the limit go biggerRalph Sanders 2 years agoVery good service, highly recommended
Manuals & Information
Related Products
You may also be interested in...
-
ProWarm™ High Output Water Underfloor Heating Kit
As low as: £497.98
-
ProWarm™ Multiple Room Water Underfloor Heating Kit
As low as: £906.97
-
ProWarm™ Low Profile Single Room Kit
As low as: £700.98
-
ProWarm™ Low Profile Multiple Room kit
As low as: £1,630.97
-
ProWarm™ LoFlo™ 15mm Multiple Room kit
As low as: £2,608.97
-
ProWarm™ LoFlo™ 18mm Multiple Room kit
As low as: £2,487.47
