The world's largest supplier of underfloor heating

ProWarm™ Standard Output Water Underfloor Heating Kit with ProCrate

ProWarm™ Standard Output Water Underfloor Heating Kit with ProCrate

Out of stock

ProWarm™ Water Underfloor Heating Systems are the ideal choice for homeowners and tradesmen wishing to install a Premium Branded water underfloor heating kit.

ProWarm™ Water Underfloor Heating Single room kits are ideal for combining one area of water underfloor heating (eg. living room) with a standard radiator system. Each kit is designed to cover an area in square meters when the pipe is spaced at 250mm apart. This spacing provides an output of 115w per square meter. If you require a higher output please choose a high output kit.

Please Note : ProWarm™ Water Underfloor Heating kits feature water temperature control, beware of systems without this facility. ProWarm™ only use high quality European Standard Pex-Al-HDPE pipe. The aluminium layer acts as an oxygen barrier, preventing the oxygen diffusion through the polymer matrix, which stops corrosion of the metal components in the system. Visit prowarm.com for more details.

ProWarm™ Water Underfloor Heating Kit Components:

Below are examples of all products which could comprise your ProWarm™ Water Underfloor Heating Kit. You can find out exactly what you will get in the box using our handy Kit Content Comparison Table below.

  • Grundfos Temperature Unit

    Grundfos Temperature Unit

    A rated UPS 2 Grundfos Single Circuit Constant Supply Temperature Unit.

  • Grundfos Mixing Unit

    Grundfos Temperature Unit

    A rated UPS 2 Grundfos Manifold Pump/Mixing Valve Unit

  • 2,3 or 4 Port Manifold

    4 Port Manifold

    Stainless steel manifold with adjustable flow meter. Factory assembled on fixing bracket.

  • Manual thermostat

    Manual thermostat

    For a small additional fee you can upgrade your thermostat to a digital, programmable, wireless or touchscreen one.

  • ProWarm™ European Standard Pex-Al-HDPE pipe

    ProWarm™ European Standard Pex-Al-HDPE pipe

    16mm (outside) diameter Pex-Al-HDPE pipe

  • ProCrate Egg Crate

    ProCrate Egg Crate

    ProCrate Egg Crate is a quick and simple system to install with ready made pipe spacing and pipe retaining fixings.

  • Edging Insulation

    Edging Insulation

    Edge Insulation is to be used around the edge of the room in order to minimise unwanted heat loss and allow for expansion.

  • Tools

    Tools

    Pipe Re Rounding Tool, Pipe Staples and Pipe Cutters.

Kit Content Comparison Table

This table shows exactly what you'll get in the box based on your chosen kit size.

Kit Size (m2) 12 15 17 20 22 25 27 30 37 50 62 75 87 100
Single Circuit Pump
Manifold Pump + Mixer
Manual Thermostat
Manifold Ports 2 2 3 3 4 4
Pipe Length (m) 50 60 70 80 90 100 110 120 150 200 250 300 350 400
Edging Insulation
Pipe re-rounding tool
Pipe staples
Pipe cutters
Nuts and olives
Valves
Procrate Panels 11 14 16 19 20 23 25 28 34 46 57 69 80 91
Kit Size (m2) 12 15 17 20 22 25 27
Temperature Unit
Manifold Pump + Mixer
Manual Thermostat
Manifold Ports
Pipe Length (m) 50 60 70 80 90 100 110
Edging Insulation
Pipe re-rounding tool
Pipe staples
Pipe cutters
Nuts and olives
Valves
Procrate Panels 11 14 16 19 20 23 25
Kit Size (m2) 30 37 50 62 75 87 100
Temperature Unit
Manifold Pump + Mixer
Manual Thermostat
Manifold Ports 2 2 3 3 4 4
Pipe Length (m) 120 150 200 250 300 350 400
Edging Insulation
Pipe re-rounding tool
Pipe staples
Pipe cutters
Nuts and olives
Valves
Procrate Panels 28 34 46 57 69 80 91
Features Values Testing Methods
Material Crosslinked polyethylene PE-Xb internal layer, internal bonding layer, intermediate aluminium layer, external bonding layer, high density polyethylene HDPE external layer. -
Colour RAL white 9003 -
Dimensions 14÷32 mm -
Application Hot and cold potable water distribution, convector and radiator heating systems, raidant heating and air cooling systems, compressed air distribution systems, industrial installations. -
Fittings Pexal® Brass, Bravopress® and Pexal® Twist -
Minimum operating Temperature(1) -60°C -
Maximum temperature +95°C/+100°C EN ISO 21003-1
Maximum Pressure +10 bar EN ISO 21003-1
Density at 23°C > 0.950 g/cm3 (crosslinked polyethylene) -
Softening temperature 135°C -
Thermal expansion coefficient 0.026 mm/m·K -
Thermal conductivity 0.42÷0.52 W/m·K -
Internal roughness 0.007 mm -
Oxygen permeability 0 mg/l -
UV Resistance Yes, if protected with UV-resistant paint -
Halogen levels Halogen-free -
(1) At any rate above the freezing temperature of the transported fluid.

Delivery options

Our delivery costs vary according to order size and location. For more information see our Delivery page.

As standard we include FREE 2 - 3 working day delivery to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products.

All orders placed after 3pm on a Friday and at the weekend will be processed on Monday and placed on next working day delivery

Please note: orders must be placed before 3pm to be eligible for our Next Working Day, Next Working Day Before 10:30am and Saturday delivery options.