Basket
£0.00
Water underfloor heating accessories
-
Our Price:£124.99 inc VATA compact prefabricated non thermostatic kit designed to provide a quick and easy way of connecting the circulating pump, flow and return connections onto a UFH manifold. Designed to be used in heat pump or other low temperature systems that do not require a thermostatic control valve.
Learn More -
Our Price:£314.99 inc VATA compact, modular control pump used to control systems up to (3kW). very lightweight and designed to connect directly onto standard pipework.
Learn More -
Our Price:£283.49 inc VATProvides temperature controlled mixed water to a multi-zone manifold connected underfloor heating system with a heat output up to 14kW. Designed to be lightweight and compact in order to connect directly onto a standard manifold without the need for extra brackets or support.
Learn More -
Our Price:£259.99 inc VATWilo / ESbe Pump mixer packs are designed for control of flow and water temperature in UFH system. It is is pre-assembled and tested to ensure that it can be fitted with the minimum of on-site labour and commissioned immediately once fitted.
Learn More -
Our Price:£289.99 inc VATWilo / ESbe Pump mixer packs are designed for control of flow and water temperature in UFH system. It is is pre-assembled and tested to ensure that it can be fitted with the minimum of on-site labour and commissioned immediately once fitted.
Learn More -
Our Price:£491.99 inc VATOut of stock
Polypipe Zonal Regulation Unit 2/3 Circuits PB970028 Polypipe underfloor heating systems can be used to be installed in single rooms and connected to existing wet heating systems. In rooms greater than 30 square meters it is recommended that the connection to the underfloor heating system is made via a manifold and installed in the same way as multiple room installation with a single area control.
Learn More -
Our Price:£319.99 inc VATThe new style pumps are simple to use, have 3 different speed setting and an EEI value of ≤ 0.23. They reduce the energy consumed by automatically adjusting the pump speed to suit the heating load and run in the most energy-conscious fashion. The use of this pump can save up to £40 a year on the energy bill.
Learn More -
Our Price:£388.49 inc VATThe Polypipe UFCH Control Pack replaces the previous version ) and meets new requirements relating to to energy efficiency. The Control Pack maintains the water temperature in an underfloor heating system between 35°C and 60°C.
Learn More -
Our Price:£73.49 inc VATThe bypass valve serves to maintain the pump pressure in heating systems at a constant level. This is necessary when the radiator / underfloor heating thermostat valves are closed or almost closed.
Learn More -
From:Our Price:£64.99 inc VATProWarm™ Pex-Al-HDPE pipe was conceived and designed to satisfy the most demanding and diverse possible uses. The result is still the most innovative, multifunctional and most reliable pipe on the international market.
Learn More -
From:Our Price:£76.99 inc VATProWarm™ Pex-Al-HDPE pipe was conceived and designed to satisfy the most demanding and diverse possible uses. The result is still the most innovative, multifunctional and most reliable pipe on the international market.
Learn More -
Our Price:£71.99 inc VATIdeal for both commercial and domestic applications, the Hep2O barrier pipe coil offers a secure and leakproof alternative to the traditional copper pipes.
Learn More -
From:Our Price:£95.99 inc VATIdeal for both commercial and domestic applications, the Hep2O barrier pipe coil offers a secure and leakproof alternative to the traditional copper pipes.
Learn More -
From:Our Price:£71.49 inc VATPolyplumb Ultra Flexible Underfloor Heating Barrier Pipe 15mm x 50m Polypipe ultra flexible underfloor heating pipe allows more flexibility while installing which speeds up the installation process.This can only be used on underfloor heating not standard hot and cold plumbing.
Learn More -
Our Price:£94.99 inc VATPolyplumb Ultra Flexible Underfloor Heating Barrier Pipe 12mm x 25m Polypipe ultra flexible underfloor heating pipe allows more flexibility while installing which speeds up the installation process.This can only be used on underfloor heating not standard hot and cold plumbing.
Learn More -
As low as: £4.49Aluminium heat spreader plates are 390mm x 1000mm x 0.3mm (groove depth: 16mm) diffiuser plates suitable for joist centers of 400mm.
Learn More -
As low as: £4.49Aluminium heat spreader plates are 390mm x 1000mm diffiuser plates suitable for joist centers of 400mm.
Learn More -
Our Price:£26.99 inc VATProWarm™ floating floor panels are ideal for installations where a finished floor is required within a minimum time scale. No wet trades are needed, making it a very fast system to install and means no waiting time for screed to dry.
Learn More -
Our Price:£24.99 inc VATProWarm™ Solid floor panels are ideal for installations where a water underfloor heating system is required with a tiled finish floor covering.
Learn More -
Our Price:£19.99 inc VATGrooved foil faced insulation panel for installing 15mm tubing over existing floor structures. An ideal fixing system for both new build and renovation projects.
Learn More -
Our Price:£17.99 inc VATLow profile system for new build or renovation projects. Grooved foil faced insulation panel for installation 15mm tubing over existing floor structures to facilitate the use of Underfloor Heating within timber flooring structures.
Learn More -
Our Price:£20.99 inc VATThe pre-grooved insulation panel are intended to be used in conjunction with JGUFHBOARD3 for areas where there is a large number of pipes in one area such as a manifold or in corridors.
Learn More -
Our Price:£8.99 inc VATProCrate Egg Crate is a quick and simple system to install. The main benefit of the system is the ready made pipe spacing and pipe retaining fixings.
Learn More -
Our Price:£7.99 inc VATOut of stock
The Profix Floor Panel has multiple pipe retention clips to secure the pipe in place.
Learn More -
Our Price:£12.49 inc VATPolyplumb Underfloor heating component floor panel for screeded floors allow for overlap and waste when ordering. For use with solid floors.
Learn More -
Our Price:£15.99 inc VATProWarm™ LoFlo™ Warm-Panels utilise a 18mm high density dry screed board which acts as a heat conducting surface transferring the heat from the pipes to the heated floor above.
Learn More -
Our Price:£15.99 inc VATOut of stock
ProWarm™ LoFlo™ Warm-Panels utilise a 15mm high density dry screed board which acts as a heat conducting surface transferring the heat from the pipes to the heated floor above.
Learn More -
Our Price:£37.49 inc VATThe end returns form a channel to allow the routing of pipes at the edges of the floor panels / walls.
Learn More -
Our Price:£2.99 inc VATThe LoFlo™ End Support is a multifunctional pipe return, pipe clip and floor support which has multiple snapping points to be able to decrease its size and maximize the heat emitter area.
Learn More -
Our Price:£2.99 inc VATThe LoFlo™ End Support is a multifunctional pipe return, pipe clip and floor support which has multiple snapping points to be able to decrease its size and maximize the heat emitter area.
Learn More -
Our Price:£184.99 inc VATOverlay™ allows floor heating to be installed into existing spaces quickly, simply and practically.
Learn More -
-
Our Price:£31.99 inc VATControlled by a thermostat or programmer, actuator valves operate to open or close the flow of water to an individual circuit on the manifold.
Learn More -
-
Our Price:£19.99 inc VAT230 volt actuator 2 wire/normally closed. Fits most manifolds to the M30 thread
Learn More -
-
Our Price:£39.99 inc VAT50m of flexible Pipe Conduit.
For use when pipe is to pass through obstacles such as walls and joints in screed, also to insulate leading pipes to far off areas to avoid hot spots in floor.
Learn More -
From:Our Price:£81.99 inc VATThe system is suitable for use in working applications up to 12 bar / 20 degrees centigrade (6 bar / 90 degrees centrigrade).
Learn More -
From:Our Price:£138.99 inc VATOffered in PEX or Polybutylene, Speedfit Pipe has an inner barrier to prevent the ingress of the atmosphere. It is manufactured and Kitemarked to British Standard BS7291: Parts 1, 2 and 3: Class S.
Learn More -
Our Price:£2.99 inc VATClip rail track is ideal when using warm water based underfloor heating within a screed or concrete floors.
Learn More -
From:Our Price:£14.99 inc VATSold in boxes of x300, our 40/60mm pipe staples are designed for use when pipework is to be installed directly on top of insulation.
Learn More -
Our Price:£10.99 inc VATBox of 100 Mounting Rails offer a quick installation of 15mm pipe. Rails are supplied 2 metres long and are pre scored every 100mm for easy cutting.
Learn More -
-
Our Price:£34.99 inc VATPipe staples for securing pipe to floor insulation. Approximately 12 staples per m2 of floor. Use with pipe staple gun, sold separately, for quick installation. Pipe staples are barbed to ensure a secure fixing to the insulation.
Learn More -
Our Price:£19.99 inc VATFloor Clips screw easily into the insulation to retain 15mm pipe, they are best installed using a Fixing Tool.
Learn More -
Our Price:£9.99 inc VATThe wood glue is used to bond the ProFloor panel together. This is only required on the tongue and groove.
Learn More -
Our Price:£9.99 inc VATThis product is used with the Profloor systems to ensure a sound and secure fastening panel to joist. These 50mm screws are required every 300mm-450mm.
Learn More -
Our Price:£5.99 inc VATThe pipe re-rounding tool is designed for use after cutting the pipework.
Learn More -
Our Price:£11.99 inc VATRatchet and lever mechanism will cut pipe, conduit and plastic extrusions up to 25mm without crushing.
Suitable for use with multi-layered barrier pipe up to 25mm Diameter
Learn More -
Our Price:£193.99 inc VATJG Staples are a cost-effective underfloor heating solution with high heat output and response time. Using the screed as a heat diffuser, 15mm JG Layflat pipe is secured with staples to rigid insulation placed over the concrete subfloor. Easy fixing is carried out by using a Staple Gun, securing the pipe to the insulation with an easy repeatable action.
Learn More -
Our Price:£151.99 inc VATFloor Clips screw easily into the insulation to retain 15mm pipe, they are best installed using a Fixing Tool.
Learn More -
Our Price:£42.00 inc VATThis 1 inch, nickel plated ball valve set including Temperature gauges, supplied as a red/blue pair, is set for use with most manifolds.
Learn More -
Our Price:£36.74 inc VAT1 inch nickel plated fill/drain valves, includes hose connection, Auto air vent and Pressure gauge included.
Learn More -
Our Price:£30.44 inc VAT1 inch nickel plated fill/drain valves, includes hose connection, manual air vent
Learn More -
Our Price:£32.55 inc VATThis 1 inch, nickel plated ball valve set, supplied as a red/blue pair, is set for use with most manifolds.
Learn More -
-
Our Price:£17.99 inc VATThis 15mm Hep2O fitting will save both time and effort as it features a secure joint-recognition technology that reduces the risk of accidental demounting.
Learn More -
Our Price:£8.99 inc VATnickel plated compression coupling 12mm x 12mm.
12mm x 12mm coupling for going from 12mm pipe to 12mm Pipe
Learn More -
Our Price:£8.99 inc VATNickel plated compression coupling 16mm x 15mm.
16mm x 15mm coupling for going from 16mm pipe to 15mm pipe (not for use going to 15mm copper ).
Learn More -
-
-
Our Price:£5.77 inc VAT12mm nickel plated eurocone connector, for connecting 12mm pipework to manifolds, these are standard when using ProWarm™ European Standard Pex-Al-HDPE pipe.
Learn More -
Our Price:£4.99 inc VAT15mm nickel plated eurocone connector, for connecting 15mm pipework to manifolds (can be used for polypipe/speedfit)
Learn More -
Our Price:£6.29 inc VAT16mm nickel plated eurocone connector, for connecting 16mm pipework to manifolds, these are standard when using ProWarm™ European Standard Pex-Al-HDPE pipe.
Learn More -
-
Our Price:£20.99 inc VAT1 inch nickel plated manifold extension coupling, suitable for adding extra circuits onto an existing system
Learn More -
Our Price:£39.99 inc VATThe elbow connection pack enables the manifold pump to be mounted at a 90 degree angle to the manifold.
Learn More -
Our Price:£13.99 inc VATOverlay Panel Jointing Glue is applied as a flat bead to the middle of the board's edge using the nozzle supplied with the cartridge.
Learn More -
Our Price:£12.99 inc VATPolypipe Overlay Floor allows floor heating to be installed in to existing spaces quickly, simply and practically. The unique system is a patented low profile panel, which is laid over existing solid or timber floors. Tiles and laminate can be laid directly onto the system. Carpet and vinyl require a capping layer of 4-6mm plywood.
Learn More -
Our Price:£17.99 inc VATThe HiDeck Screedboard joint adhesive is designed for use with the HiDeck Screedboards (18mm).
Learn More -
Our Price:£22.49 inc VATCellecta’s range of HiDECK high density floor elements are the ideal product for a multitude of flooring applications. They are suitable for underfloor heating and sound applications, feature a tongue and groove edge detail (no screws) and benefit from high impact resistance.
Learn More -
Our Price:£41.99 inc VATThis BBA approved damp proof membrane is a low-density polyethylene membrane to protect buildings from moisture in the ground.
Learn More -
Our Price:£29.49 inc VATThis Vapour barrier covers 100m2. It is used to prevent moisture into concrete and timber frames. It is made from Recycled Polythene to NHBC standards and is very lightweight and easy to install.
Learn More -
Our Price:£159.99 inc VATReliable and precise testing results' the dual-valve system (Twin-Valve) enables self-testing of the pump, as well as a precise fine adjustment of the pressure.
Learn More -
Our Price:£149.99 inc VATThis pipe tacker gun is used to fix 40mm, 50mm, 60mm pipe staples that fix underfloor heating pipes into the insulation layer.
Learn More -
Our Price:£174.99 inc VATOur pipe decoiler saves problems when laying water underfloor heating pipe.
Learn More -
Our Price:£51.45 inc VAT22mm - Two-port - Zone Valve with Detachable Head and Pre-wired Cable - ZONE 250 205
Learn More
