The Heatmiser neoAir offers a smarter way to control your heating and hot water from anywhere when purchased with the Neohub!
The Heatmiser neoAir is a battery powered thermostat and is compatible with our RF Switch / UH8-RF Wireless Receivers.
The neoAir can be configured to work as a thermostat, a timer or heating and timer combined, perfect for controlling heating and hot water.
Self Learning Preheat
Self Learning Preheat calculates the amount of heat up time required to ensure your home is warm when you wake and return home.
This is automatically optimised throughout the year to save you money and will automatically detect any changes in your home that causes the preheat time to change.
Mesh Networking
neoStat and neoAir communicate wirelessly to the neoHub to offer a reliable and scalable network system. The mains powered neoStat automatically repeats the data signal from other neoStat/neoAir in the home. If there are no neoStat's installed, the neoAir communicates directly with the neoHub and so the neoPlug or Boost can be used to extend the communication distance.
Easy Navigation
The neoStat/neoAir series offer an easy to navigate programming system, providing all of the options across the bottom of the Backlit display.
Battery Powered
Thermostat Mode
Timer Mode
Heating and Timer Mode
Backlit Display
5/2, 7 Day and 24 Hour Programming
Non Programmable Options
Self Learning Preheat
Holiday Function
Temperature Hold
Air Sensor Connection
Floor Sensing Mode
Wireless Switching To Uh8-Rf Rf Switch
Frost Protection
C/F Selectable
4 Comfort Levels per Day
Key Code Facility
Heatmiser RF-Switch
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
Heatmiser neoAir
Supply
4 x AAA Batteries
Dimensions (L,H,D)
86x86x26mm
Temperature Range
05-35C
No. Heating Levels
4
Max Current
3A
Heatmiser RF-Switch
Compatibility
Slimline-RF
Touch-RF
neoAir
UH8-RF
no. Of Heating Zones
1
no. Of Hot Water Zones
1
Boiler Output
1
Mounting Type
Surface
Relay Load Max
3a Resistive
Total Load Max
9a Resistive
Supply
230v Ac
Dimensions (l,h,d)
108x90x24mm
Heatmiser neoAir
Carefully separate the front half of the thermostat from the back plate by placing a small flat head terminal driver into the slots on the bottom face of the thermostat.
Mark 2 hole positions on the wall using the back plate as a positioning template.Drill at the marked positions and insert a wall plug into each hole.
Screw the thermostat back plate securely on the wall.
Clip the front of the thermostat back onto the thermostat back plate.
Important Do not install near to a direct heat source as this will affect functionality.
Important Do not push hard on the LCD screen as this may cause irreparable damage.
This wireless thermostat is designed to be surface mounted
Heatmiser RF-Switch
Using a small screwdriver, slightly loosen the screw located at the base of the RF-Switch. You can then carefully separate the front panel from the back plate.
Position the RF-Switch back plate on the wall, fixing into place using the screws provided.
Terminate the cables to the RF-Switch as shown in the wiring diagram.
Mount the front panel onto the back plate, tighten the retaining screw on the base.
Switch on the power supply, the power LED will illuminate.
Let our experts help you
Product Question? Need help placing an order?
Our customer support is available Monday to Friday 7am-6pm.
At The Underfloor Heating Store, we strive to make every step of your order as easy and convenient as possible, from finding the right underfloor heating setup to best suit you to taking delivery of your system the very next day.
We're proud to offer a range of delivery options to suit you, including free delivery on all of our orders or next working day delivery for a fixed price of £4.99
2-3 working days delivery - FREE (Order before 4pm Monday - Friday)
Next working day - £4.99 (Order before 4pm Monday - Friday, applies to orders over £19.99)
Next working day before 10.30am - £14.99 (Order before 4pm Monday - Friday)
Saturday delivery - £29.99 (Order before 4pm Monday - Friday)
At The Underfloor Heating Store, our customers have 30 days to upgrade, replace or refund their orders.
Returns
At The Underfloor Heating Store, we want to ensure you are happy with every purchase you make. If you have any issues with your chosen product, whether damaged, faulty or simply an unwanted item, you can simply return what you bought for a refund. Learn more.
Replacements
We take great care in the delivery of all of our products, however, in the event of your delivery arriving damaged or if you notice a manufacturing fault of any kind within 48 hours of delivery, you're within your rights to a replacement. Learn more.
Upgrades
Within 14 days of purchasing from us, you are eligible to upgrade if you deem you want something a little better. Simply send it back to us brand new and we'll happily assist you with an upgrade to your order. Learn more.
Lifetime warranty
At The Underfloor Heating Store, we are committed to providing our customers with high-quality products and outstanding customer service. That's why we offer a comprehensive warranty on all of our underfloor heating products, with a lifetime warranty for our ProWarm range of products.
Our warranties are designed to give you peace of mind and ensure that your underfloor heating system operates reliably for years to come.
At The Underfloor Heating Store, our main priority is customer satisfaction. To cement our commitment to this, we are proud to offer our Underfloor Heating Price Match Promise. If you find a lower price on an identical product anywhere else, we will match it – guaranteed!
Contact Our Team
Get A Quote
System Selector
Manuals & Videos
Room Calculator
Knowledge Hub
